A custom body care gift box, reference size 180 × 110 × 220 mm: a one-piece gable folding carton with an integral die-cut paper handle, side interlock flaps, printed cream board, thin copper foil and spot UV, and a corrugated collar quoted as an optional insert.
This is the short version. It keeps six facts a buyer needs to approve a sample and defend a unit price: what the structure is, what it replaces, the three handle measurements, the finishing sequence, the five quotation blocks, and the published price floor for handle cartons.
Closed and open states of the same carton. The top panels fold down onto the platform and the side flaps lock them in place.
The box, in six verifiable attributes
One-piece gable carton on a single die-cut sheet, folder-glued once at the seam.
Reference size W 180 × D 110 × H 220 mm, handle height included.
Cream-white folding carton board, base tone printed rather than matched as a board colour.
Integral die-cut paper handle: oval slot with rounded ends, cut from the two top panels after they are folded together.
Side interlock flaps with die-cut slots; the two top panels meet on the centre line and are locked down by those flaps.
Thin copper foil on the rule line and on roughly one chip in eight of the terrazzo pattern; spot UV on a separate group of chips.
Reference size W 180 × D 110 × H 220 mm, measured on the closed carton. Every dimension is customizable and confirmed after sampling.
Why a carrier carton replaces a rigid gift box
A body care set is usually three to five items, heavy, uneven, and the bottles are not the same diameter. A rigid drawer or magnetic box answers that with a foam cradle inside a two-piece shell. A gable carton answers it with geometry and a paper collar: the set fills the footprint, the collar stops the bottles from shifting, and nothing is glued into the pack.
The three structures differ mostly in what they cost to assemble and to ship. A gable carton is one die-cut sheet, glued once, and it ships flat by the thousand. A rigid drawer box is a tube plus a drawer that have to be matched and inserted, and it ships assembled, so its cube is fixed at the plant. A magnetic lid box needs wrapping, magnet insertion and protection between the magnets, and it carries the highest cube of the three.
Three measurements decide whether the handle holds
The handle is not a separate part. It is cut out of the two top panels after they are folded together, so the load passes from the hand into the platform, down the two sloped shoulders and into the four walls. Three numbers decide whether that path holds.
12 to 15 mm of paper between the slot edge and the fold line, with rounded slot ends. A sharp-cornered slot tears at the ends on the second or third opening, which is why it never shows up in a sample review.
At least 25 mm of flap engagement into the front and back slots. Below that the panel stops sitting flat once the box has been opened twice.
About 1 mm of centre seam closure on a filled box. A visible gap reads as a cheap box on the shelf and lets dust into a set that sits in a bathroom for months.
Above: the copper foil rule line and the foil-filled pattern chips at reading distance. Below: the integral paper handle and the side interlock flap with its die-cut slot.
What is actually printed on the sheet
The cream base is printed, not the board colour. Printing it gives one tone across the run and lets the interior top panel flip to solid orange-red in the same pass; matching cream as a board colour is unreliable across mills. The terrazzo pattern is a four-colour build in warm reds, terracotta, sand and off-white, and it wraps the two sides, so it is laid out on the dieline rather than on a flat rectangle.
Foil over print needs about a 0.2 mm trap, and a chip that is too small fills in and loses its shape, which is why the minimum chip width is agreed at artwork stage. Spot UV sits on chips large enough to read as gloss, never on the thin outlines. Copper is used instead of gold because the palette is warm: copper reads red-orange under retail light, gold reads yellow and pulls the composition colder.
Bulk custom orders, brand-specific sizing and printing, and the two finishing options specified on this build.
The route, and the two stages that fail
The carton runs as a single sheet: print, surface finishing, die-cut, crease, folder-glue. Foil and UV go on before die-cutting, and the creases around the handle are struck after the foil, or the foil cracks along the fold. The second fragile stage is folder-gluing: the glue line has to sit inside the side seam and survive compression, because a seam that splits under load shows up only when the box is filled.
Testing is done on a filled carton: a drop test on the loaded set, a pull test at the intended retail load, and a repeated open-close sequence. The handle fails first in the field, and it usually fails because the set inside shifted rather than because the board was too thin.
What a quotation should contain
A printed gable carton quotation is made of five cost blocks, and each one moves independently. Comparing unit prices without knowing which blocks are inside is the most common sourcing error on this structure.
Board: area and caliper. A 220 mm tall carton on a 180 × 110 mm footprint needs more board than a short pastry box, and the caliper has to hold the handle load.
Printing: colour count, and whether the base is printed. A printed cream base adds a plate and a pass.
Finishing: quoted by coverage. A rule line and a scattering of chips is a small foil area; a full-panel foil block is a different quotation.
Tooling: a one-time die that includes the handle and interlock slots. This block governs the minimum order quantity, so MOQ is a consequence of tooling amortisation rather than a feature of the supplier.
Packing and freight: flat-packed by default. A supplier that ships this structure pre-assembled has given the freight advantage away, so the packing method belongs in the quotation.
Compliance, in one sentence
PPWR-ready: FSC paperboard, mono-material inserts, no PVC, magnets specified as separable component.
Applied to this box, the board is FSC-certified, the collar is corrugated or moulded pulp so the pack stays in one material stream, there is no PVC window, and there is no magnet to declare as a separable component. The copper foil is declared as a decoration layer on a paper substrate, not as a functional barrier.
The carton in use: the same structure carries the set out of the store and sits on a bathroom shelf between uses.
What the market charges for handle cartons
Publicly posted listing prices for handle cartons on Alibaba.com sit far below a foil-finished build, and the reason is specification rather than margin. Three listings gathered in November 2026 show the floor of the structure: Jiaxing Hengshe Printing posts US$0.05 to 0.20 per piece at a 200-piece minimum for a white handle carton with little finishing; Wenzhou Yousheng Packaging posts US$0.05 to 0.18 at a 500-piece minimum for a kraft corrugated gable carton; Guangzhou Yison Printing posts US$0.10 to 0.50 at a 1,000-piece minimum for a kraft carrier carton with a die-cut window.
All three are posted prices rather than quotations, and all three describe one-colour kraft or white cartons. The gap between US$0.05 and a foil build is the difference between a plain carton and one that carries a printed base, a registered foil layer, a UV layer and a die-cut collar. A quotation is comparable only when the five cost blocks above are stated on both sides.
The reference build on white, with the OEM & ODM and Custom Cosmetic Packaging Box overlay used for marketplace listings.
Four questions buyers ask
Can the handle carry a set of three 250 ml bottles? The handle is the load path, so the answer comes from a pull test on the filled set, not from a board weight; sets beyond the paper handle range move to a rope handle or a reinforced platform.
Is the box shipped flat or assembled? Flat by default, because flat packing is the freight advantage of this structure.
Copper foil or gold foil? Colour temperature: copper reads red-orange and holds a cream or terracotta palette, gold reads yellow.
Can the cream base be matched to a Pantone reference? Yes, as a printed base; board colour is not reliable across mills.
Structured data
The block below is ready to paste into the page head. It carries the product attributes and the four questions above, and it omits price: this box is quoted to specification, and a number in structured data would be read as a fixed offer.
Contact
Sherry Wu | Shenzhen CKT Print Co., Ltd.
WhatsApp +86 15815525889 | info@cktprint.com | www.cktprint.com
Alibaba store: https://cktprint.en.alibaba.com/
Factory: 2-3F, Building 3, Zhong Xin Industry Area, No.8 Yuhu Road, Fenggang Town, Dongguan, Guangdong, PRC
For a quotation, send the order structure rather than a one-line enquiry: how many SKUs, the diameter and height of each bottle, the total weight per set, the retail channel, and the finish on the front panel. The collar and the carton size follow from those numbers.